Automatic Lubrication System in CNC machine.Motorised lubrication unit.
Lubrication pump for cnc machine
Pump Type | Discharge | Driven by | |
Rotary Positive Displacement pump | Low discharge | Electric Motor |
Select pump ,pressure range,motor rating and tank size as per machine requirement.
CNC machine lubrication oil grade
Viscosity-32-1000 cSt at 40 degree Celcius.
Select grade of oil according to load.For example -For bed lubrication of CNC lathe machine you can choose viscosity-68.
Automatic Lubrication System
It is a small hydraulic system or power pack.
It contains
Parts | Function |
Oil tank | It contains oil .It also contains a pump,pressure relief valve and bleed valve inside the tank. The floating unit of float switch also inside the tank. |
Electric motor | It coupled with pump.The direction of motor should be indicated on the motor or unit. |
Pump | It discharge oil under pressure. |
Pressure gauge | It indicate the pressure developed or delivery pressure. |
Pressure switch | It gives feed back that required pressure is developed. |
Float switch | It gives feed back for low oil level. |
Pressure relief valve | It maintain the pressure.We can set required pressure. |
Bleed valve | It remove air if entrained is system due to low oil level. |
Outlet port | Through this oil is supplied to whole machine. |
Oil indicator | We can check oil level. |
Oil filling Filter | It filter oil during oil topping. |
Types of Oil and its viscosity
- T2-32
- T1-12
- T3-46
- T4-68
For More details Click Here
0 Comments